INTAPOL

Description

INTAPOL masterbatches are based on a fluoro polymer which has a high affinity for metal and will form a surface coating on the extruder screw, barrel, and die which enables the polymer melt to pass through with less resistance, resulting in :

• Increased throughput
• Elimination of shark skin
• Back pressure reduction
• Reduced die build up, and ultimately leading to reduction in power consumption

Application

Processing additives find use in a wide variety of applications from blow film to fibre, profile extrusion, pipe/tubing and cabling processes. They can be used with many polymers including LDPE, LLDPE, HDPE, and PP.

• Initially a dosage of 2 - 5 % based on formulation should be applied to obtain the required surface coating.
• After 15 - 20 minutes, depending on some factors such as condition of equipments, resin rheology, a dosage of 0.5 - 2 % is usually enough.
• It is FDA approved to be used in food contact application.

Packaging

• INTAPOL is supplied in pellet form, in 25 kg PE bags with PP woven laminated paper bag as outer layer.
• Store in a cool and dry place to prevent moisture absorption.